Angled Drawerline

0 out of 5
0 review(s)
£50.72

NOTE :- PLEASE SELECT ALL STEPS AS STATED IN NUMBERS.

KITCHEN UNIT DIMENSION.

  1. HEIGHT = 720mm High (+150mm legs)
  2. WIDTH = 1000mm wide
  3. DEPTH = Standard depth is 560mm deep, where as depth can be changed through “Choose Depth” option

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.
0 out of 5
0 review(s)
£86.50

KITCHEN UNIT DIMENSION.

  1. HEIGHT = 720mm High
  2. WIDTH = 370mm wide
  3. DEPTH = Standard depth is 560mm deep, where as depth can be changed through “Choose Depth” option

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section
0 out of 5
0 review(s)
£41.90

NOTE :- PLEASE SELECT ALL STEPS AS STATED IN NUMBERS.

KITCHEN UNIT DIMENSION.

  1. HEIGHT = 720mm High (+150mm legs)
  2. WIDTH = 500mm wide
  3. DEPTH = Standard depth is 560mm deep, where as depth can be changed through “Choose Depth” option

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.
0 out of 5
0 review(s)
£43.00

NOTE :- PLEASE SELECT ALL STEPS AS STATED IN NUMBERS.

KITCHEN UNIT DIMENSION.

  1. HEIGHT = 720mm High (+150mm legs)
  2. WIDTH = 500mm wide
  3. DEPTH = Standard depth is 560mm deep, where as depth can be changed through “Choose Depth” option

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.
0 out of 5
0 review(s)
£48.51

NOTE :- PLEASE SELECT ALL STEPS AS STATED IN NUMBERS.

KITCHEN UNIT DIMENSION.

  1. HEIGHT = 720mm High (+150mm legs)
  2. WIDTH = 800mm wide
  3. DEPTH = Standard depth is 560mm deep, where as depth can be changed through “Choose Depth” option

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.

checking

£254.00
0 out of 5
0 review(s)
0 out of 5
0 review(s)
£254.00

Double Drawerline

£115.50£128.23
0 out of 5
0 review(s)
0 out of 5
0 review(s)
£115.50£128.23

DOUBLE WALL UNITS 1000 MM

£48.62
0 out of 5
0 review(s)
0 out of 5
0 review(s)
£48.62

NOTE :- PLEASE SELECT ALL STEPS AS STATED IN NUMBERS.

KITCHEN UNIT DIMENSION.

  1. HEIGHT = 720mm High (+150mm legs)
  2. WIDTH = 1000mm wide
  3. DEPTH = Standard depth is 560mm deep, where as depth can be changed through “Choose Depth” option

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.

DOUBLE WALL UNITS 1200 MM

£50.93
0 out of 5
0 review(s)
0 out of 5
0 review(s)
£50.93

NOTE :- PLEASE SELECT ALL STEPS AS STATED IN NUMBERS.

KITCHEN UNIT DIMENSION.

  1. HEIGHT = 720mm High (+150mm legs)
  2. WIDTH = 1200mm wide
  3. DEPTH = Standard depth is 560mm deep, where as depth can be changed through “Choose Depth” option

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.

DOUBLE WALL UNITS 700 MM

£45.15
0 out of 5
0 review(s)
0 out of 5
0 review(s)
£45.15

NOTE :- PLEASE SELECT ALL STEPS AS STATED IN NUMBERS.

KITCHEN UNIT DIMENSION.

  1. HEIGHT = 720mm High (+150mm legs)
  2. WIDTH = 700mm wide
  3. DEPTH = Standard depth is 560mm deep, where as depth can be changed through “Choose Depth” option

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.

DOUBLE WALL UNITS 800 MM

£46.30
0 out of 5
0 review(s)
0 out of 5
0 review(s)
£46.30

NOTE :- PLEASE SELECT ALL STEPS AS STATED IN NUMBERS.

KITCHEN UNIT DIMENSION.

  1. HEIGHT = 720mm High (+150mm legs)
  2. WIDTH = 800mm wide
  3. DEPTH = Standard depth is 560mm deep, where as depth can be changed through “Choose Depth” option

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.

DOUBLE WALL UNITS 900 MM

£47.46
0 out of 5
0 review(s)
0 out of 5
0 review(s)
£47.46

NOTE :- PLEASE SELECT ALL STEPS AS STATED IN NUMBERS.

KITCHEN UNIT DIMENSION.

  1. HEIGHT = 720mm High (+150mm legs)
  2. WIDTH = 900mm wide
  3. DEPTH = Standard depth is 560mm deep, where as depth can be changed through “Choose Depth” option

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.

FINSBURY FITZROY Stone

£0.10
0 out of 5
0 review(s)
0 out of 5
0 review(s)
£0.10

Shaker door style 18mm thick HDF with melamine reverse 4 Matt painted colours in stock Smooth painted finish Primed door is unfinished option( ready to paint) 27 Paint to order colours available in Matt only

Westend Ellerton Stone

£0.10
0 out of 5
0 review(s)
0 out of 5
0 review(s)
£0.10

Door Style = 1 Piece handleless Shaker with Reverse Chamfer Door Thickness is 18mm (shallow centre panel) HDF with Melamine reverse FINISH = Smooth Matt Paint finish (Primed door = Unfinished, ready to paint) Painted MATT finish only 27 Paint to order colours available in Matt only

 

DAILY UPDATES

Check out the store for the latest item updates

SUPPORT 24/7

Hotline 0123 456 789