CORNER WALL UNITS

Showing all 9 results

0 out of 5
0 review(s)
£54.40
  1. HEIGHT = 720mm High
  2. WIDTH = 1000mm wide
  3. DEPTH = Standard depth is 300mm deep, where as depth can be changed through “Choose Depth” option

 

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.
0 out of 5
0 review(s)
£49.77
  1. HEIGHT = 720mm High
  2. WIDTH = 600mm wide
  3. DEPTH = Standard depth is 300mm deep, where as depth can be changed through “Choose Depth” option

 

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.
0 out of 5
0 review(s)
£69.46
  1. HEIGHT = 720mm High
  2. WIDTH = 600mm wide
  3. DEPTH = Standard depth is 300mm deep, where as depth can be changed through “Choose Depth” option

 

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.
0 out of 5
0 review(s)
£57.88
  1. HEIGHT = 720mm High
  2. WIDTH = 600mm wide
  3. DEPTH = Standard depth is 300mm deep, where as depth can be changed through “Choose Depth” option

 

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.
0 out of 5
0 review(s)
£60.19
  1. HEIGHT = 720mm High
  2. WIDTH = 600mm wide
  3. DEPTH = Standard depth is 300mm deep, where as depth can be changed through “Choose Depth” option

 

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.
0 out of 5
0 review(s)
£50.93
  1. HEIGHT = 720mm High
  2. WIDTH = 700mm wide
  3. DEPTH = Standard depth is 300mm deep, where as depth can be changed through “Choose Depth” option

 

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.
0 out of 5
0 review(s)
£52.09
  1. HEIGHT = 720mm High
  2. WIDTH = 800mm wide
  3. DEPTH = Standard depth is 300mm deep, where as depth can be changed through “Choose Depth” option

 

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.
0 out of 5
0 review(s)
£53.25
  1. HEIGHT = 720mm High
  2. WIDTH = 900mm wide
  3. DEPTH = Standard depth is 300mm deep, where as depth can be changed through “Choose Depth” option

 

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.
0 out of 5
0 review(s)
£57.88

NOTE :- PLEASE SELECT ALL STEPS AS STATED IN NUMBERS.

KITCHEN UNIT DIMENSION.

  1. HEIGHT = 720mm High (+150mm legs)
  2. WIDTH = 600mm wide
  3. DEPTH = Standard depth is 560mm deep, where as depth can be changed through “Choose Depth” option

PRODUCT DESCRIPTION.

  1. 18mm MFC solid kitchen cabinets.
  2. Carcass made with Rigid Glued and Dowelled construction.
  3. Cam & Dowel Construction can be available on request; it is helpful for kitchen areas with awkward dimensions.
  4. Flat pack units are also available; this option is helpful for narrow entrance to the kitchen area and etc.
  5. Based on the dimension of the item, (like angled corner base unit, the tall unit or similar) may be delivered flat pack.
  6. Base units are supplied as standard 720mm High (+150mm legs)
  7. Standard colour matching edging tape is 0.4mm deep, whereas 2mm depth is available at extra cost, to give your kitchen an even better look.
  8. Blum integrated soft close 94-degree hinges for standard units.
  9. Blum 175 degree hinges used for ‘L’ Shaped corner units
  10. Blum Antaro or  Hettich Architech drawer box. Based on the selected item
  11. Blum Metabox or Hettich Mutitech drawer box. Based on the selected item.
  12. 50mm service void at the back of base units
  13. Unit height stated is excluding legs
  14. Fully adjustable 150mm High legs for fitting on uneven floors.
  15. Special BESPOKE Units can be manufactured to your requirements – please check our BESPOKE KITCHEN section and supply drawing for costing purposes.
  16. Integrated doors do not come with butt hinges., They are fixed using standard overlay hinges where it is applicable.
  17. Choose your suitable Delivery option from the list in the delivery section.
 

DAILY UPDATES

Check out the store for the latest item updates

SUPPORT 24/7

Hotline 0123 456 789